Our partners at Corrocoat Benelux, recently worked on a project to repair a secondary settling tank, which was suffering from severe corrosion. The tank, which had its last inspection over 10 years ago, had been in service at a petrochemical plant, and was in much need of repair, having been subjected to waste sludge. Following […]
One of the largest and most competitive engineering, procurement, construction and installation contractors of offshore oil and gas projects in the Asia-Pacific region, recently approached our partners in China, to provide leakage prevention for an open drain caisson. With leakages being a very common problem with this type of equipment, the client had considered repairing […]
We recently welcomed Superintendent, Ryan Robertson (Corrocoat USA), Development Manager, Nguyen Minh Hieu and Tran Quang Phuc, Commercial and Services Department Manager (both from Vietnam Gre-Coating Engineering Services JSC), to the Corrocoat UK Head office. The trio were trained in our Composite Structural Rehabilitation System; which uses a combination of specialised laminating resins, interlayered with […]
India is the not only the largest consumer of sugar in the world, it is now also the largest producer of sugar, displacing Brazil. The Indian sugar industry is the second largest agro-based industry in India.* With this in mind, our partners in India, Kirloskar Corrocoat, regularly work with clients in the sugar industry, providing refurbishment, repair and corrosion […]
Corrocoat Fibrecoat Application Using the Agmec Pipe Sprayer Fibrecoat is a glass fibre reinforced vinyl ester glass-flake coating. Developed by Corrocoat, for use as a high-performance lining, Fibrecoat rehabilitates severely corrosion damaged pipes, and adds exceptional mechanical strength. The coating may be applied in a single layer or multiple layers at up to 3000 microns […]
Our partners at Corrocoat Benelux were recently commissioned to coat 300 square meters of new flue gas duct sections, with a diameter of 2200mm. The sections were intended for an energy from waste plant and required a coating which could protect the steel against flue gases. Corrocoat Benelux have a long standing relationship with the […]
India’s enormous energy needs are compelling a huge expansion of its installed power capacities. In response to the environmental implications of these high targets, the Indian Power Ministry has mandated clean coal technologies for the new generation of power plants, and has implemented major emission controls for existing plants, including installing flue gas desulfurization (FGD) […]
Corrocoat USA were asked to apply a surface tolerant coating system to the structural steel on a pipe bridge, on site at a coal-fired power plant in Florida. The pipe bridge, spanned a 135 foot (41 meter) diameter thickener tank, which is used to clarify or separate the solids included in recycled gypsum. The solids are […]
For the past two weeks we had the pleasure of hosting our partners from Corrocoat Caspian, at our head office in Leeds. Aliya Zhumanova, Corrocoat Caspian Director, joined us with Konstantin Vassilyev, Murat Jumabekov and Kirill Slavko to undergo advanced technical training. Our Technical Supervisor, Douglas Lynch oversaw all of the training, starting the 2 […]
An international marine client recently commissioned our partners in Singapore, BHM Engg Services, to refurbish and provide corrosion protection for a badly corroded sewage tank. The tank had been in service around 2 ½ years and the client requested an alternative to an epoxy paint system which had already failed having suffered from chemical attack. […]
