Corrocoat SEL: New Spray Applied Epoxy Glassflake Coating

Corrocoat SEL is an epoxy lining providing durable chemical protection in aggressive atmospheric conditions and immersed environments. Corrocoat SEL is a spray-applied epoxy glassflake lining, intended for single or multi-coat application, that provides durable chemical protection in aggressive atmospheric conditions and immersed environments. Corrocoat SEL has a smooth finish and can withstand immersed temperature levels […]

Read More
Posted on Monday, January 13th, 2020

Fluiglide ‘E’ Secures Consecutive WRAS Approval

Water Regulations Advisory Scheme Ltd Consecutive Material Approval Fluiglide “E” has been awarded consecutive materials approval under the Water Regulations Advisory Scheme. The new approval will run from November 2019 to November 2024. The notification letter from the WRAS Approvals and Enquiries Manager stated: “The material referred to in this letter, Polyglass VEF, is suitable […]

Read More
Posted on Wednesday, November 27th, 2019

RRS Sir David Attenborough – Corrosion Protection for Seawater Pipes

Corrosion Protection for Seawater Pipes The RRS Sir David Attenborough is one of the world’s most advanced polar research vessels. The ship was commissioned by NERC, built by Cammell Laird and operated by British Antarctic Survey. This new research platform will transform how ship-borne science is conducted in the Polar Regions. Corrocoat was asked to provide corrosion protection against seawater […]

Read More
Posted on Thursday, September 12th, 2019

New Corrocoat Underwater Repair and Coating System

Corrocoat has launched a new underwater repair system designed for use on submerged surfaces such as structural steelwork, pilings, jetties. Based upon the well-established Plasmet range of products, the system is both fresh and marine water tolerant. The system is designed to be applied and cure whilst immersed. The underwater repair system comprises: Plasmet UWP […]

Read More
Posted on Monday, August 12th, 2019

Corrocoat Fibrecoat; Protection for Pipelines

Corrocoat Fibrecoat, a high-performance glass fibre reinforced, abrasion and temperature resistant protective lining for pipelines, is now available. Corrocoat Fibrecoat is a glass fibre reinforced vinyl ester glass-flake coating developed for use as a high-performance lining and rehabilitation material for thinned/corroded pipes and where additional tensile properties are required. The product is applied using the […]

Read More
Posted on Friday, July 12th, 2019

Corrocoat Protective Coatings Gain Lloyds Register Approval

Corrocoat is pleased to advise three of its specialist coating have gained Lloyds Register Approval;  Polyglass Zipcoat, Polyglass VEF, and Corrocoat Zip E. Polyglass Zipcoat – Cert No: MATS/4990/1 Polyglass VEF – Cert No: MATS/4991/1 Corrocoat Zip E – Cert No: MATS/4992/1 Polyglass Zipcoat provides durable corrosion protection in aggressive atmospheric conditions and some immersion […]

Read More
Posted on Tuesday, June 4th, 2019

Plasmet ZF Corrosion Inhibiting Coating Now Available as an Aerosol

Plasmet ZF – a corrosion-inhibiting coating from Corrocoat is now available in a  400ml aerosol for easy application in difficult to access areas and for touch up work. Coating with a Plasmet ZF aerosol takes much less time when compared with brush application; it also ensures that every inch of the surface is covered – […]

Read More
Posted on Wednesday, April 10th, 2019

On Site Pipe Coating for new Power Generation Project in South India

Kirloskar Corrocoat Private Ltd (KCPL) has been operating in India since 1993 using Corrocoat’s world-leading specialist anti-corrosion coating systems to protect all manner of infrastructure and customers assets in many different industry sectors. Earlier this year KCPL, was asked to provide corrosion protection for large bore cold water inlet and outlet pipes for the Tangedco […]

Read More
Posted on Tuesday, March 26th, 2019

Service and Recoat Raw Water Pump

Corrocoat Japan was called in to service a raw water pump at a steel plant that the company had last serviced 7 years previously in 2011. At that point, the vertical wet-pit volute pump had been in operation since 1993 without any servicing or ant-corrosion treatment and all the internal components were found to be […]

Read More
Posted on Friday, March 8th, 2019

Rehabilitation for UK Steel Mill Gas Main

In the Summer of 2017, Corroserve was successful in completing an internal pipe lining project on the gas main at a large industrial plant. The main gas pipeline runs through the site for approximately 3km and has been in service on the plant for over 40 years. The client wished to internally line the bottom […]

Read More
Posted on Wednesday, July 4th, 2018