Product Launch – Corrocoat Fibrecoat

Posted On : Wednesday, November 15th, 2017 in News

Corrocoat is pleased to announce the launch of Fibrecoat– a vinyl ester lining containing both glassfibre and glassflake which will provide rehabilitation and a high-performance lining for thinned and corroded pipes and for where additional tensile properties are required.

Corrocoat Fibrecoat should be applied in single or multiple layers at up to 3000 µm per coat, with an airless spray pump of 45:1 ratio or greater, or for pipe internals a pipe sprayer. Normally used in Off-White or Translucent Brown, Fibrecoat has a spreading rate of 0.25m²/litre at 3,000µm.

Pipework and other equipment coated with the Fibrecoat will be corrosion protected and have greater structural strength, even after long periods – at a fraction of the cost and inconvenience of replacement. It is the ideal solution for capital process equipment where corrosion has reduced wall thickness to below an acceptable minimum.

Visit Our Other Sites